|
Click For ForceField® Product
List & Brief Descriptions
RTU-Quart $9.99
[Add to Cart]
[View Cart]
Concentrate-Gal $48.00
[Add to Cart]
[View Cart]
RTU-Gallon $20.00
[Add to Cart]
[View Cart]
|
· Deep
Cleans Grout & Tile
· Removes
Soap Scum, Stains & Grime
· Environmentally
Friendly
· Safe
on Most Hard Surfaces
· Noncorrosive,
Non-Fuming
·
No Bleach,
Nonphosphate Formula |
|
OVERVIEW
ScumBlaster™
is the most effective Tub & Tile Cleaner you will ever
use. More than a bathroom cleaner, it can be used
wherever hard water deposits or soap scum are a problem.
Dull surfaces become shiny and squeaky clean. The
cleaning power of ScumBlaster™ is comparable to
that of muriatic (hydrochloric) acid, yet this
noncorrosive formulation is environmentally friendly,
non-fuming, and safe for septic tanks. ScumBlaster™
has the power to make hard water deposits, stains, scum,
and grime disappear.
How & Why Scumblaster™ Works
Hard-water
deposits and soap-scum residues on tubs, ceramic tile,
and other hard surfaces are caused by the presence of
calcium. Well water or hard municipal water sources
makes these problems worse. ScumBlaster™ has been
formulated using an organic salt that was designed as a
safe replacement for traditional acids in industrial
applications. By combining this unique material with
special low pH surfactants, ScumBlaster™ has the
ability to dissolve stubborn deposits and clean even the
toughest stains, mold, or mildew.
Applications
Because
ScumBlaster™ is such a strong cleaner, always test
for compatibility with the surface to be cleaned by
applying a small quantity of the product to an
inconspicuous area. ScumBlaster™ can be used on a
wide range of surfaces: showers, tubs, tile, grout,
fiberglass, plastic, glass, rubber, porcelain, vinyl,
and a variety of synthetic surfaces. ScumBlaster™
is excellent for use in homes, businesses, schools,
boats, hotels, patios, and many other areas. Use care
when applying to metallic or metal plated surfaces, as
ScumBlaster™ works upon contact on these surfaces
and should be promptly and thoroughly rinsed after
application. While not required, persons with sensitive
skin should wear rubber gloves when using this product.
Spray
ScumBlaster™
onto the surface to be cleaned, wipe with a damp cloth
or sponge, and thoroughly rinse with water. For tougher
build-ups or stains, repeat application or wait 1 to 3
minutes before wiping and rinsing.
Also Available
in the Following Concentrated Sizes
1 Gallon
5 Gallon
55 Gallon
 |
MSDS